Skip to main content

Build your own RFID reader

Build your own RFID reader: "


We asked for it and our readers delivered. [Klulukasz] left a comment pointing to this diy RFID reader that was a final project in 2006 for a class at Cornell University. It is well documented and includes not only a schematic and code, but an explanation of the design considerations used during the build. The project uses an ATmega32 and the parts list priced out at about $50 at the time. There were plenty of responses to the RFID spoofer post pointing out that there are readers available for $40, but we want the fun of building our own.


A bit more vague with the details but no less interesting is this other simple RFID reader design. Thanks to [Chuck] for his comment which pointed to that link.



"

Comments

Post a Comment

Popular posts from this blog

Microsoft Keyboard macro Sleep

1) Open up your "Microsoft Keyboard" properties (aka Intellipoint ) 2) Select the macro key you want to assign it to, and hit Configure 3) Select the option "Start a program, Web page, or file" and hit next 4) Type this into the box : Rundll32.exe Powrprof.dll,SetSuspendState Sleep Njoy ! source :  http://www.tomshardware.co.uk/forum/5145-63-windows-sleep-macro
Post a Comment
Gimme M0r3 ->

Change Your IP Address From Windows PowerShell #windows10

step 1 : run ISE as Administrator step 2 : run ipconfig command choose adapter to set eg. "Ethernet" step 3 : run netsh : netsh interface ip set address name=”[Adapter Name]” static [IP] [Subnet Mask] [Default Gateway] eg. netsh interface ip set address name=”Ethernet” static 192.168.0.200 255.255.255.0 192.168.0.240 or use DHCP :  netsh interface ip set dnsservers name=”Ethernet” source=dhcp netsh interface ip set address name=”Ethernet” source=dhcp Njoy !
Post a Comment
Gimme M0r3 ->

How to Fake/Trick Your Netbook's Screen Resolution to Higher

Get 1024x768 or higher resolution on your netbook via this registry hack ! Go to the Start menu and type in  regedit  in the search box, then hit Enter At the top menu, go to Edit then Find... and search for " Display1_DownScalingSupported " Change each instance you find (you'll likely find 2 results for this) from "0" to "1". Make sure you change e very found instance , because otherwise the hack won't work (in my experience). Once done, restart the system. Njoy ! Source :  http://mobileoffice.about.com/od/netbooks/a/How-To-Change-Your-Netbooks-Screen-Resolution.htm
Post a Comment
Gimme M0r3 ->